Item # | MT1 | MT1/M |
---|---|---|
Micrometer | ||
Resolution | 0.025" Translation per Revolution |
500 µm Translation per Revolution |
Travel | 0.50" | 12.7 mm |
Engraving | Every 0.001" | Every 10 µm |
Taps | Top: 1/4"-20 (Qty. 7) Bottom: 1/4"-20 (Qty. 7) and 8-32 (Qty. 4) |
Top: M6 (Qty. 7) Bottom: M6 (Qty. 7) and M4 (Qty. 4) |
Barrel Size | Ø3/8" (Ø9.5 mm) |
The MT1 is configured with the micrometer drive, which has a 1/2" range and 0.001" per division. The MT1/M is configured with the micrometer drive, which has a 13 mm range and 10 µm per division. Each stage contains seven 1/4"-20 (M6) tapped holes which are 0.25 (6.2 mm) deep. Two oversized 1/4"-20 (M6) counterbores allow the stage to be directly attached to a mounting adapter (sold below) or a metric or imperial breadboard with user-supplied cap screws.
The bottom face of the MT1(/M) has four 8-32 (M4) tapped holes for mounting which are exposed when multiple stages are used to form a 2- or 3-axis stage. See the XYZ Assembly tab for more information.
(222) 247 2490
ventas@begssolutions.com.mx