| DESTACADOS |
|---|
1500-CAB1
I/O Cable with Ferrite Core for Former-Generation 1500M Series Scientific CCD Cameras
Descripción
Male 6-Pin Mini Din Male Connector Pin Layout (Both Ends of 1500-CAB1)
Optional Accessories for Former-Generation 1500M Series Cameras
The 1500-CAB1 is a 10' (3 m) long cable that mates with the auxiliary connector on our former-generation 1500M Series 1.4 megapixel CCD cameras and provides the ability to externally trigger the camera as well as monitor status output signals. Both ends of the cable feature a male 6-pin Mini Din connector. This cable is ideal for use with our interconnect break-out boards described above. For information on the pin layout, please see the diagram and table below.
This cable is only compatible with our former-generation item #'s 1500M-GE, 1500M-GE-TE, 1500M-CL, and 1500M-CL-TE.
Male 6-Pin Mini Din Male Connector Pin Layout (Both Ends of 1500-CAB1)
| Pin Numbera | Signal | Description |
|---|---|---|
| 1 | LVAL (Output) |
Refers to "Line Valid." It is an active-high TTL signal and is asserted during the valid period on each line. It returns low during the inter-line period between each line and during the inter-frame period between each frame. |
| 2 | CC1_OUT (Output) |
An active-low TTL signal that is the buffered version of the Camera Link CC1 signal. The CC1 signal is driven from the host and is one of the software control signals for the camera. CC1_OUT allows triggering of other devices. |
| 3 | TRIGGER_IN (Input) |
A TTL input used to trigger exposures on the transition from the high to low state. |
| 4 | GND | The electrical ground for the camera signals. |
| 5 | FVAL (Output) |
Refers to "Frame Valid." It is a TTL output that is high during active readout lines and returns low between frames. |
| 6 | STROBE (Output) |
A TTL output that is high during the actual sensor exposure time when in continuous, overlapped exposure mode. It is typically used to synchronize an external flash lamp or other device with the camera. |
BEGS SOLUTIONS
(222) 247 2490
ventas@begssolutions.com.mx
Dirección
Sn. Pedro
Sn. Pedro Cholula Puebla
Calle
Calle 24 Ote. #608
C.P
C.P 72760
Horario
Lunes - Viernes
Lunes - Viernes
9:00 am - 6:00 pm
9:00 am - 6:00 pm